删除 'Toaster_interrupt.ino'

Toaster_interrupt.ino

@@ -1,105 +0,0 @@
-#include <LiquidCrystal.h>
-
-#include <PWM.h>
-
-#include <DallasTemperature.h>
-
-#include <OneWire.h>
-
-LiquidCrystal lcd(13, 12, 10, 9, 8, 7);
-#define PIN_OUTPUT 3
-#define LED 5
-volatile int Stop = 2;
-int tempsensor = 6;
-int Magnet = 11;
-int32_t frequency = 10;
-int Grades;
-double temperature;
-double Tmax = 30;
-int S;
-unsigned long t = 0;
-unsigned long tmax = 60000;
-int D;
-void Drehschalter();
-void LCD();
-void Abbrechen();
-OneWire onewirepin(tempsensor);
-DallasTemperature sensors(&onewirepin);
-
-void setup() {
-
-  lcd.begin(16, 2);
-  InitTimersSafe();
-  bool success = SetPinFrequencySafe(PIN_OUTPUT,frequency);
-  sensors.begin();
-  pinMode(Magnet, OUTPUT);
-  pinMode(Stop, INPUT);
-  attachInterrupt(digitalPinToInterrupt(Stop), Abbrechen, CHANGE);
-}
-
-void loop() {
- 
-      while (t < tmax) {
-          t=millis();
-          digitalWrite(Magnet, HIGH);
-          Drehschalter();
-          sensors.requestTemperatures();
-          temperature=sensors.getTempCByIndex(0);
-          D =map(analogRead(1), 0, 1023, 0, 255);
-          pwmWrite(PIN_OUTPUT, D);
-          analogWrite(LED, D);
-          LCD();
-//          S=digitalRead(2);
-//          if (S == HIGH) {
-//            t=tmax;
-//          }
-//          if (temperature > Tmax) {
-//            t=tmax;
-//          }
-      
-      }
-
-      digitalWrite(Magnet, LOW);
-                 
-}
-
-void Drehschalter() {
-          Grades = analogRead(0);
-          if (Grades >= 0 && Grades <= 205) {
-            tmax = 10000;
-            }
-          if (Grades > 205 && Grades <= 410) {
-            tmax = 20000;
-            }
-          if (Grades > 410 && Grades <= 615) {
-            tmax = 30000;
-            }
-          if (Grades > 615 && Grades <= 820) {
-            tmax = 40000;
-            }
-          if (Grades > 820 && Grades <= 1024) {
-            tmax = 50000;
-            }
-}
-
-void LCD() {
-          lcd.setCursor(0, 0);
-          lcd.print("T=");
-          lcd.print(temperature);
-          lcd.print("`C ");
-          lcd.print("t=");
-          lcd.print(t/1000);
-          lcd.print("s");
-          lcd.setCursor(0, 1);
-          lcd.print("D=");
-          lcd.print((D*100)/255);
-          lcd.print("% ");
-          lcd.print("tmax=");
-          lcd.print(tmax/1000);
-          lcd.print("s   ");
-}
-
-void Abbrechen() {
-  t = tmax;
-}
-