1234567891011121314151617181920212223242526272829 |
- //////////////////////////////////////////////////////////////////////////////////////////////////////////
- // BMP280_DEV - ESP32, I2C Communications, Default Configuration, Normal Conversion, User-Defined Pins
- //////////////////////////////////////////////////////////////////////////////////////////////////////////
- #include <BMP280_DEV.h> // Include the BMP280_DEV.h library
- float temperature, pressure, altitude; // Create the temperature, pressure and altitude variables
- BMP280_DEV bmp280(A6, A7); // Instantiate (create) a BMP280 object and set-up for I2C operation on pins SDA: A6, SCL: A7
- void setup()
- {
- Serial.begin(115200); // Initialise the serial port
- bmp280.begin(); // Default initialisation, place the BMP280 into SLEEP_MODE
- bmp280.setTimeStandby(TIME_STANDBY_2000MS); // Set the standby time to 2 seconds
- bmp280.startNormalConversion(); // Start BMP280 continuous conversion in NORMAL_MODE
- }
- void loop()
- {
- if (bmp280.getMeasurements(temperature, pressure, altitude)) // Check if the measurement is complete
- {
- Serial.print(temperature); // Display the results
- Serial.print(F("*C "));
- Serial.print(pressure);
- Serial.print(F("hPa "));
- Serial.print(altitude);
- Serial.println(F("m"));
- }
- }
|