Dateien hochladen nach ''

Fertigstellung von Level 1 mit Eingabe der Koordinaten sowie Abgleich mit der Position des Schiffes

Beleg3INFO.ino

@@ -1,18 +1,24 @@
 /*
  Arduino Spiel
- Autor: Johannes Tümler
- Letzte Änderung: 27.06.2020
+ Autor: Johannes Tümler, Janek Franz, Marvin Richter
+ Letzte Änderung: 14.07.2020
  Zweck: Beleg 3 Hilfscode für den Start
 */
 
 unsigned char gesamtpunktzahl;
 byte x;
+byte y;
+byte lauf;
+byte xsetz;
+byte ysetz;
+byte bew;
 const int red = 13, blue = 11, green = 12;
 
 void setup()
 {
     Serial.begin(9600);
     gesamtpunktzahl = 0;
+    randomSeed(analogRead(0));
     pinMode(red, OUTPUT);
     pinMode(green, OUTPUT);
     pinMode(blue, OUTPUT);
@@ -69,6 +75,9 @@ void loop()
       blink(&red);
       blink(&red);
 
+      x = 0;
+      y = 0;
+
       digitalWrite(0,LOW);
 
       
@@ -81,14 +90,6 @@ void loop()
         level1();
         
       }
-
-      if (digitalRead(3) == LOW)
-      {
-       digitalWrite(3,HIGH);
-        level2();
-         delay(1000);
-        
-      }
       
     if (digitalRead(5) == LOW) // Hier im Beispiel: Wenn ein Masse-Signal / GND an Pin 5 liegt, dann blinkt es.
     {
@@ -100,8 +101,210 @@ void loop()
 
 void level1()
 {
-  Serial.print("Level 1");
+  Serial.println("Level 1");
   if(x == 0 && y == 0){
   x = random(1,6);
   y = random(1,6);
-  }
+  Serial.println(String(x));
+  Serial.println(String(y));
+  }
+  coordsx1();
+  
+  
+}
+
+void coordsx1()
+{
+  
+  while (xsetz == 0){
+    digitalWrite(green, HIGH);
+    if (digitalRead(6) == LOW)
+    {
+          digitalWrite(green, LOW);
+          xsetz = 1;
+          delay(500);
+          coordsy1();
+    }
+    
+    if (digitalRead(7) == LOW)
+    {
+          digitalWrite(green, LOW);
+          xsetz = 2;
+          delay(500);
+          coordsy1();
+    }
+    
+    
+    if (digitalRead(8) == LOW)          
+    {
+          digitalWrite(green, LOW);
+          xsetz = 3;
+          delay(500);
+          coordsy1();
+    }
+    
+    if (digitalRead(9) == LOW)
+    {
+          digitalWrite(green, LOW);
+          xsetz = 4;
+          delay(500);
+          coordsy1();
+    }
+    
+    if (digitalRead(10) == LOW)
+    {
+          digitalWrite(green, LOW);
+          xsetz = 5;
+          delay(500);
+          coordsy1();
+    }
+    
+}
+}
+
+void coordsy1()
+{
+  digitalWrite(blue, HIGH);
+  while (ysetz == 0){
+    if (digitalRead(6) == LOW)
+    {
+          digitalWrite(blue, LOW);
+          ysetz = 1;
+          
+    }
+    
+    if (digitalRead(7) == LOW)
+    {
+          digitalWrite(blue, LOW);
+          ysetz = 2;
+          
+    }
+    
+    
+    if (digitalRead(8) == LOW)
+    {
+          digitalWrite(blue, LOW);
+          ysetz = 3;
+          
+    }
+    
+    if (digitalRead(9) == LOW)
+    {
+          digitalWrite(blue, LOW);
+          ysetz = 4;
+          
+    }
+    
+    if (digitalRead(10) == LOW)
+    {
+          digitalWrite(blue, LOW);
+          ysetz = 5;
+          
+    }
+    Serial.println(String(xsetz));
+    Serial.println(String(ysetz));
+  }
+  delay(1000);
+  digitalWrite(blue,HIGH);
+  digitalWrite(green,HIGH);
+  delay(200);
+  digitalWrite(blue,LOW);
+  digitalWrite(green,LOW);
+  posi1();
+
+}
+
+void posi1()
+{
+  gesamtpunktzahl ++;
+  if(x == xsetz && y == ysetz)
+  {
+    Serial.print("Treffer");
+    xsetz = 0;
+    ysetz = 0;
+    digitalWrite(2, HIGH);
+    digitalWrite(6, HIGH);
+    digitalWrite(7, HIGH);
+    digitalWrite(8, HIGH);
+    digitalWrite(9, HIGH);
+    digitalWrite(10, HIGH);
+    gewonnen();
+  }
+  else if((x + 1 == xsetz or x - 1 == xsetz or x == xsetz)&& (y == ysetz or y + 1 == ysetz or y - 1 == ysetz))
+  {
+    digitalWrite(red, HIGH);
+    Serial.print("1");
+    delay(2000);
+    xsetz = 0;
+    ysetz = 0;
+    digitalWrite(2,HIGH);
+    digitalWrite(6, HIGH);
+    digitalWrite(7, HIGH);
+    digitalWrite(8, HIGH);
+    digitalWrite(9, HIGH);
+    digitalWrite(10, HIGH);
+    digitalWrite(red, LOW);
+    coordsx1();
+  }
+  else if((x + 2 == xsetz or x - 2 == xsetz or x == xsetz)&& (y == ysetz or y + 2 == ysetz or y - 2 == ysetz))
+  {
+    digitalWrite(blue, HIGH);
+    Serial.print("2");
+    delay(2000);
+    xsetz = 0;
+    ysetz = 0;
+    digitalWrite(2, HIGH);
+    digitalWrite(6, HIGH);
+    digitalWrite(7, HIGH);
+    digitalWrite(8, HIGH); 
+    digitalWrite(9, HIGH);
+    digitalWrite(10, HIGH);
+    digitalWrite(blue, LOW);
+    coordsx1();
+  }
+  else if ((x + 2 >= xsetz or x - 2 <= xsetz or x == xsetz)&& (y == ysetz or y + 2 >= ysetz or y - 2 <= ysetz)) 
+  {
+    xsetz = 0;
+    ysetz = 0;
+    digitalWrite(2, HIGH);
+    digitalWrite(6, HIGH);
+    digitalWrite(7, HIGH);
+    digitalWrite(8, HIGH);
+    digitalWrite(9, HIGH);
+    digitalWrite(10, HIGH);
+    coordsx1();
+  }
+}
+
+void gewonnen()
+{
+  
+  for(byte lauf = 3; lauf >= 1;lauf--)
+    {
+    digitalWrite(red,HIGH);
+    delay(100);
+    digitalWrite(red,LOW);
+    digitalWrite(green, HIGH);
+    delay(100);
+    digitalWrite(green,LOW);
+    digitalWrite(blue,HIGH);
+    delay(100);
+    digitalWrite(blue, LOW);
+    }
+  for(gesamtpunktzahl; gesamtpunktzahl >= 1;gesamtpunktzahl --)
+  {
+   
+    digitalWrite(red,HIGH);
+    digitalWrite(green,HIGH);
+    digitalWrite(blue,HIGH);
+    delay(300);
+    digitalWrite(red,LOW);
+    digitalWrite(green,LOW);
+    digitalWrite(blue, LOW); 
+    delay(300);
+    
+  }
+  
+  loop();
+}
+